I found a trashed combination safe on the sidewalk recently. Here’s a very quick, to the point method of opening it with minimal damage. I watched a few other videos and wanted to try and keep the safe undamaged, and still fully usable. After shooting the video, I filled the hole I drilled with epoxy and also used a little bit to stick the faceplate back on. In case anyone was curious, it wasn’t filled with $100 bills.
Category Archives: Uncategorized
After finding a nice cheap LCD projector I needed a decent projection screen. Here’s how I made mine.
This article was featured on the front page of instructables.com during Feburary 2008.
Read all about my build here: